AIR-Intelligence Detectors
High-Sensitivity Smoke Detection (HSSD)
AIR-Intelligence products provide superior early warning smoke detection that adapt to virtually any environment and the normal fluctuations within those environments.
High Performance Aspirated Air Sampling Technology...
AIR-Intelligence detectors continuously adapt their sensitivity to the environment in which they are installed, providing alarm thresholds which are 'relative' to the background particle levels in the protected area, instead of placing the alarm threshold at a fixed level relative to ambient conditions. |
|
| At any time, the detector's performance remains constant, regardless of fluctuations in the normal background particle level. AIR-Intelligence detectors only respond to particle levels significantly above the expected background level, such as from a genuine fire situation. |
Features:
• High-sensitivity provided by laser-based forward light scatter mass detection and particle evaluation for reliable early warning detection.
• Four programmable alarm thresholds (Aux, Pre-Alarm, Fire 1 and Fire 2).
• ClassiFire™ Perceptive Artificial Intelligence system.
• Dual Technology LDD 3D3 Laser Dust Discrimination and Elimination system.
Technical Specifications:
• Particle Sensitivity Range: 0.003 to 10 micron.
• The Industry's Widest Sensitivity Range: 0.00046 to 7.62% obs/ft.
• RS-485 built-in as standard for networking and remote communications. Up to 127 detectors per loop with 4,000 ft. between devices.
• RS-232 built-in for direct PC interface without the expense of high level interface equipment.
• Powered by 24-Volt DC regulated supply, low current draw.
Approvals/Listed:
By major North American certification agencies. |
 | ASD-160H
The AIR-Intelligence ASD-160H provides high sensitivity smoke detection in a smaller package for localized applications. ClassiFire™ Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup.
The ASD-160H ships with 'Fault' and 'Fire' relays and an optional Input Relay Card provides four levels of alarm, fault and three programmable remote inputs. Networkable through SenseNET™ or the Command Module. The detector is housed in a rugged metal enclosure.
Key Features:
• Single pipe inlet
• Up to 2500 sq. ft
• Up to 164 ft. pipe length
• Up to 10 sample ports
• Four alarm thresholds
• SenseNET Network ready
• Direct PC connect |
 | ASD-320
The AIR-Intelligence ASD-320 provides high sensitivity smoke detection in a medium size package for small to medium applications. ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup.
The ASD-320 ships with 'Fault' and 'Fire' relays and an optional Input Relay Card provides four levels of alarm, fault and three programmable remote inputs. Networkable through SenseNET or the Command Module. The detector is housed in a rugged metal enclosure.
Key Features:
• Two pipe inlets
• Up to 10,000 sq. ft
• Up to 328 ft. pipe length
• Up to 50 sample ports
• Four alarm thresholds
• SenseNET Network ready
• Direct PC connect |
 | ASD-640
The AIR-Intelligence ASD-640 provides high sensitivity smoke detection for medium to large applications. ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup.
The ASD-640 ships with 'Fault' and 'Fire' relays plus three programmable remote inputs. Networkable through SenseNET or the Command Module. The detector is housed in a rugged metal enclosure. An optional plastic enclosure is also available.
Key Features:
• Four pipe inlets
• Up to 20,000 sq. ft
• Up to 820 ft. pipe length
• Up to 100 sample ports
• Four alarm thresholds
• SenseNET Network ready
• Direct PC connect |
 | Remote Display Unit
Remote Display Units mimic the display of an AIR-Intelligence detector and provide a means of adding or positioning a graphical display where needed. An unlimited number of RDU's can be associated with a single detector. Interface is via the RS-485 SenseNET bus.
The unit consists of a 3U high metal front panel plate with a graphics overlay and a main PCB which contains terminals for power and RS-485 communications. An optional relay board can be added providing 'Fault' and four 'Alarm' relays at the display unit. Can be rack mounted or housed in a metal wall mount enclosure as shown.
Key Features:
• Affordably priced
• 26 bar graph segments
• Four alarm indicators
• SenseNET RS-485 networkable
• Remote relay option
• Wall mount enclosure option
• Wall mount enclosure option
• 19" rack mountable option
• Stratos series compatible |
 | ASD-CM
The AIR-Intelligence ASD-CM Command Module provides a single location display, control and interface option for systems of up to 127 detectors. Provides global programming of all detector functions simultaneously. Multiple configurations are available including an integral detector option, rugged metal enclosure and a 19" rack mount version.
The integral bar graph automatically displays the status of the detector on the network with the highest alarm level to identify potential problem areas. Integral 'Fault' and four 'Alarm' relays provide global detector output for integration to other systems. Contact monitors enable detectors from alternative manufacturers' to be monitored where necessary.
Key Features:
• Network management of up to
127 detectors
• Global network display
• Global network programmer
• Multiple configurations
• SenseNET RS-485 communications
• RS-232 for PC interface
• Integral Modbus and BACnet
protocol for BMS integration |
Technical Manuals: AIR-Intelligence™ High-Sensitivity Smoke Detection Systems
|
|
|
On-Line Documentation
Nyttig informasjon shared..I er veldig glad for å lese denne artikkelen. Takk for å gi oss fin info. Fantastisk walk-through. Jeg setter pris på dette innlegget.
ReplyDeleteBrannvern Larvik