Thursday, September 29, 2011

System - Commercial/Industrial Vehicle Systems

The Kidde Sentinel System provides a fully integrated fire detection and suppression solution to meet the most challenging fire hazards for vehicles in forestry applications, agribusiness and mining operations.

null

Sentinel® DCS Dry Chemical System

Proven fire suppression with Kidde Fire Systems’ Dry Chemical Fire Suppression Agent.

null

Sentinel® NET Detection and Control System

Rugged fire detection system for large industrial vehicles

null

Sentinel® LS Wet Chemical System

The best option for quick fire suppression on industrial vehicles.

null

Sentinel® SA1 Detection and Control System

A Detection and Control System that is designed to protect a wide range of small to medium-sized vehicles or machines, including haulers, graders, waste management machines and trucks.

Monday, September 26, 2011

ARIES® NETLink SYSTEM CONTROL UNITS

The ARIES NETLink is a fully featured and cost competitive multi-loop, intelligent, addressable and networkable Fire Suppression Control Panel designed for commercial, industrial and high tech facilities.

ARIES NETLink

 

The ARIES NETLink is the technologically most advanced multi-loop control unit available to the industry today.  Dependability and maximum protection against inadvertent release are hallmarks of Kidde Fire Systems panels. We build in safeguards so that no single component failure or combination of abnormal operating conditions, including main-microprocessor failure is allowed to result in accidental release activation.

 

At its core, the ARIES NETLink is a suppression panel; approved for use with Clean Agents, CO2, Wet and Dry Chemical Systems as well as water based systems such as Water Mist, Water Deluge, Pre-action and Foam.  It combines the high quality, system reliability, and flexibility required by modern commercial, high-tech and industrial applications in an aesthetically pleasing and physically robust package.

Features

  • Reliable and dependable suppression control that features Triple-R redundancy
  • Expandable from 3 to 8 SLCs (2,040 addresses)
  • Networkable up to 64 nodes with 130,560 addresses across network
  • Event-Output-Control programming
  • High level serviceability and diagnostics
  • Backwards compatible with installed base of SmartOne devices, network and suppression releases (control heads, solenoids, initiators)
  • Network supports both copper wire and fiber optic cable

Technical Specifications

  • 2 SLC with 255 SmartOne® Addresses each
  • 4 x 40 Display-Keypad
  • 2 Notification and 2 Release/ Notification Circuits
  • 3 Programmable and 1 Trouble Form-C Relays
  • USB Ports for PC and Printer
  • 4 Installer Programmable Soft-Switches
  • 10,000 Event Log Capacity

Listing & Approvals

  • FM Approved
  • UL Listed
  • cUL Listed
  • CSFM
  • NYC Fire Department Approved
If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com

Sunday, September 25, 2011

Fenwal Spherical FM-200® System

Fenwal Spherical FM-200® System

Features:
Environmentally friendly, sustainable technology
Clean and Non-Toxic, safe for use in occupied spaces
Design for maximum protection with minimum hardware, less space and lower cost
Wide range of product offerings for best economical fit to application
Compatible with all of Fenwal’s various detection and control options

Technical Specifications:
Fast acting 10 second discharge
Designed per NFPA 2001, total flooding systems
Offered in fill ranges from 20 to 196 lb. of agent
Listed and Approved for applications in the temperature range of 32°F to 130°F

Listings/Approvals:
UL Listed
UL Canada (ULC)
Factory Mutual Approved
MEA Listed

If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com

Fenwal Phoenix FM-200® System

Fenwal Phoenix FM-200® System

The Fenwal Phoenix System is a high performance suppression system developed to provide economic protection for large fire protection projects and specialized applications. Although the Phoenix System is considered the best alternative as a drop-in replacement of your Halon system, It is widely used in protection of large telecommunications facilities, museums, and data storage systems for banks and financial institutions.

Features:
Provide active fire protection when coupled with Fenwal’s various 24 hr detection and control systems.
Increased flow performance allows for remote location of cylinders.
Increased performance deems it a virtual “Drop-in” replacement for installed Halon 1301 systems.
Listed and approved with 3-way directional valves for economic protection of multiple enclosures.

Technical Specifications:
Utilizes a patented “Fan Type” nozzle for immediate vaporization of the agent as it discharges.
Uses separate nitrogen storage as a propellant to obtain higher mass flow rates.
Can be design to achieve 140% agent in pipe and still achieve a
10-second discharge at the nozzle.

Listings/Approvals:
UL Listed
UL Canada (ULC)
Factory Mutual approved
MEA

If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com

FENWAL ANALASER® II HSSD SYSTEM

FENWAL ANALASER® II HSSD SYSTEM

The AnaLASER II HSSD is an air sampling system that is 2000 times more sensitive than conventional smoke detectors. The higher sensitivity of the detector allow it to detect low energy fires even in high airflow environments which tend to dilute smoke concentrations.

Features:
Laser particle-counting technology
Uses particle size discrimination technology—no filter required!
Full configuration using LaserNET™ software
History buffer stores up to 28 days of smoke history

Technical Specifications:
Up to 20,000 sq. ft. of coverage
Programmable sensitivity range:
- Ultra Detector:0.00015%/ft. to 0.03%/ft. obs.
- Standard Detector: 0.00075%/ft. to 0.3%/ft. obs.
Use with IIM to network up to 127 detectors

If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com

Fenwal Bottom-Discharge Systems

Fenwal Bottom-Discharge Systems
The Fenwal Bottom-Discharge System is the preferred fire suppression system for protection of mission critical facilities that can’t afford fire-related business interruption. It utilizes the world’s most trusted, waterless clean agent, FM-200.Installation of these systems are found all over the world protecting Data Centers, IT facilities, Telecomm, Switchgear rooms and more.

Features:
Environmentally friendly, sustainable technology
Clean and Non-Toxic, safe for use in occupied spaces
Design for maximum protection with minimum hardware, less space and lower cost
Wide range of product offerings for best economical fit to application
Compatible with all of Fenwal’s various detection and control options

Technical Specifications:
Fast acting 10 second discharge
Designed per NFPA 2001, total flooding systems
Offered in fill ranges from 150 lb to 850 lb. of agent
Listed and Approved for applications in the temperature range of 32°F to 130°F

Listings/Approvals:
UL Listed
UL Canada (ULC)
Factory Mutual Approved
MEA Listed

If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com.0

Friday, September 23, 2011

Kidde WHDR™ Kitchen Wet Chemical System


Kidde WHDR™ Kitchen Wet Chemical System 
The Kidde WHDR™ Wet Chemical System offers 24-hour automatic or manual protection for commercial cooking areas; ducts, plenums, hoods and cooking surfaces. Wet chemical agent designed for quicker flame knockdown and faster suppression. 
Exceeds stringent UL 300 standard and complies with NFPA Standards 96 and 17A. Offers unmatched coverage, with fewer discharge nozzles and flow points, meaning reduced installation time and cost.

Features:
Safe and reliable fire protection 
Ease of design and flexibility of installation
Flexibility and reliability of important safety system

Technical Specifications:
APC provides fastest flame knockdown and best securement
Four cylinder sizes available
Proven controls and detection

Listings/Approvals:
Underwriters Laboratories, Inc. (UL 300) Listed
Underwriters Laboratories of Canada (ULC/ORD 154C.6) Listed
NYC MEA Approved
American Bureau of Shipping (Type Approval)
Det Norske Veritas (Type Appproval)
Lloyds Register of Shipping (Type Approval)
ISO 15371
EC (TPED) models available

If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com

Fenwal 9300 Series FM-200® System


Fenwal 9300 Series FM-200® System

The Fenwal 9300 Series is the preferred fire suppression system for protection of mission critical facilities that can't afford fire-related business interruption. It utilizes the world's most trusted agent, FM-200. The Fenwal 9300 System has proven experience—it can be found installed in data centers, IT facilities, telecommunication centers, switch gear rooms and more around the world…

Features:
Environmentally friendly, sustainable technology
Clean and non-toxic—safe for use in occupied spaces
Designed with maximum protection with minimal hardware, less space and lower cost
Wide range of product offerings for best economical fit to application
Compatible with all of Fenwal's various detection and control options

Technical Specifications:
Fast acting 10 second discharge
Designed per NFPA 2001, total flooding systems
Offered in fill ranges from 5 lb. to 900 lb. systems
Listed and Approved for hazard temperatures from 32°F to 130°F

Listings/Approvals:
UL Listed
ULC Listed (Canada)
Factory Mutual Approved
MEA Listed

If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com.

High-Sensitivity Smoke Detection (HSSD)


AIR-Intelligence Detectors
High-Sensitivity Smoke Detection (HSSD)
AIR-Intelligence products provide superior early warning smoke detection that adapt to virtually any environment and the normal fluctuations within those environments.

High Performance Aspirated Air Sampling Technology...
AIR-Intelligence detectors continuously adapt their sensitivity to the environment in which they are installed, providing alarm thresholds which are 'relative' to the background particle levels in the protected area, instead of placing the alarm threshold at a fixed level relative to ambient conditions.
At any time, the detector's performance remains constant, regardless of fluctuations in the normal background particle level. AIR-Intelligence detectors only respond to particle levels significantly above the expected background level, such as from a genuine fire situation.
Features:
• High-sensitivity provided by laser-based forward light scatter mass detection and particle evaluation for reliable early warning detection.
• Four programmable alarm thresholds (Aux, Pre-Alarm, Fire 1 and Fire 2).
• ClassiFire™ Perceptive Artificial Intelligence system.
• Dual Technology LDD 3D3 Laser Dust Discrimination and Elimination system.

Technical Specifications:
• Particle Sensitivity Range: 0.003 to 10 micron.
• The Industry's Widest Sensitivity Range: 0.00046 to 7.62% obs/ft.
• RS-485 built-in as standard for networking and remote communications. Up to 127 detectors per loop with 4,000 ft. between devices.
• RS-232 built-in for direct PC interface without the expense of high level interface equipment.
• Powered by 24-Volt DC regulated supply, low current draw.

Approvals/Listed:
By major North American certification agencies.
ASD-160H
The AIR-Intelligence ASD-160H provides high sensitivity smoke detection in a smaller package for localized applications. ClassiFire™ Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup.

The ASD-160H ships with 'Fault' and 'Fire' relays and an optional Input Relay Card provides four levels of alarm, fault and three programmable remote inputs. Networkable through SenseNET™ or the Command Module. The detector is housed in a rugged metal enclosure.

Key Features:
• Single pipe inlet
• Up to 2500 sq. ft
• Up to 164 ft. pipe length
• Up to 10 sample ports
• Four alarm thresholds
• SenseNET Network ready
• Direct PC connect
ASD-320
The AIR-Intelligence ASD-320 provides high sensitivity smoke detection in a medium size package for small to medium applications. ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup.

The ASD-320 ships with 'Fault' and 'Fire' relays and an optional Input Relay Card provides four levels of alarm, fault and three programmable remote inputs. Networkable through SenseNET or the Command Module. The detector is housed in a rugged metal enclosure.

Key Features:
• Two pipe inlets
• Up to 10,000 sq. ft
• Up to 328 ft. pipe length
• Up to 50 sample ports
• Four alarm thresholds
• SenseNET Network ready
• Direct PC connect
ASD-640
The AIR-Intelligence ASD-640 provides high sensitivity smoke detection for medium to large applications. ClassiFire Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup.

The ASD-640 ships with 'Fault' and 'Fire' relays plus three programmable remote inputs. Networkable through SenseNET or the Command Module. The detector is housed in a rugged metal enclosure. An optional plastic enclosure is also available.

Key Features:
• Four pipe inlets
• Up to 20,000 sq. ft
• Up to 820 ft. pipe length
• Up to 100 sample ports
• Four alarm thresholds
• SenseNET Network ready
• Direct PC connect
Remote Display Unit
Remote Display Units mimic the display of an AIR-Intelligence detector and provide a means of adding or positioning a graphical display where needed. An unlimited number of RDU's can be associated with a single detector. Interface is via the RS-485 SenseNET bus.

The unit consists of a 3U high metal front panel plate with a graphics overlay and a main PCB which contains terminals for power and RS-485 communications. An optional relay board can be added providing 'Fault' and four 'Alarm' relays at the display unit. Can be rack mounted or housed in a metal wall mount enclosure as shown.
Key Features:
• Affordably priced
• 26 bar graph segments
• Four alarm indicators
• SenseNET RS-485 networkable
• Remote relay option
• Wall mount enclosure option
• Wall mount enclosure option
• 19" rack mountable option
• Stratos series compatible
ASD-CM
The AIR-Intelligence ASD-CM Command Module provides a single location display, control and interface option for systems of up to 127 detectors. Provides global programming of all detector functions simultaneously. Multiple configurations are available including an integral detector option, rugged metal enclosure and a 19" rack mount version.

The integral bar graph automatically displays the status of the detector on the network with the highest alarm level to identify potential problem areas. Integral 'Fault' and four 'Alarm' relays provide global detector output for integration to other systems. Contact monitors enable detectors from alternative manufacturers' to be monitored where necessary.
Key Features:
• Network management of up to
127 detectors
• Global network display
• Global network programmer
• Multiple configurations
• SenseNET RS-485 communications
• RS-232 for PC interface
• Integral Modbus and BACnet
protocol for BMS integration

Technical Manuals: AIR-Intelligence™ High-Sensitivity Smoke Detection Systems

• AIR-Intelligence ASD-160H Aspirating Smoke Detection System Design, Installation, Operation and Maintenance Manual
33-308100-001 AA  
• AIR-Intelligence ASD-320 Aspirating Smoke Detection System Design, Installation, Operation and Maintenance Manual
33-308100-002 AA 
• AIR-Intelligence ASD-640 Aspirating Smoke Detection System Design, Installation, Operation and Maintenance Manual
33-308100-003 AA 
• AIR-Intelligence Remote Configuration Software User's Guide
33-308100-004 AA 
• AIR-Intelligence PipeCAD Design, Installation and PipeCAD Software Manual
33-308100-005 AA 
• AIR-Intelligence SenseNET Aspirating Smoke Detector Communication System Software User's Guide
33-308100-006 AA  
 On-Line Documentation

Kidde FE-13 Suppression System


Kidde FE-13 Suppression System

The Kidde FE-13 Suppression System is designed for protection of applications in low temperature environments and high-ceiling structures or where a high concentration of fire suppression agent is required to inert the protected application against fire. Uses clean, fast, people-safe FE-13 gaseous agent that works by absorbing heat from the fire. System includes detectors, a control unit, agent storage cylinders, piping and discharge nozzles.

Features:
• Listed and approved for use by the U.S. EPA
• Ideal for inerting environments
• Tested and approved all of Kidde's various detection and control options
• Flexible design to fit your application

Technical Specification:
• Provides it own source of propellant with a high vapor pressure
• Extinguishes fire both physically and chemically
• Very low boiling point to allow a discharge to gas as low temperatures (140° F)
• Typical use concentration at 18% - NAOEL at 30% - High Safety Margin
• Approved for hazards with 25 foot ceiling heights

If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com.

Kidde Novec™ 1230 Fire Protection Fluid System


Kidde Novec™ 1230 Fire Protection Fluid System

Kidde Engineered Fire Suppression System Designed for Use with 3M™ Novec™ 1230 Fire Protection Fluid is engineered to provide clean, fast, people-safe protection for applications requiring a “green” solution to fire suppression. The system includes detectors, a control unit, agent storage cylinders, piping and discharge nozzles. The system is computer calculated to provide system discharge within 10 seconds.

Technical Specifications:
Novec™ 1230 Fluid presents distinct environmental benefits, including a zero Ozone Deletion Factor (ODP) and the lowest Global Warming Potential (GWP) of an chemical based clean agent, key to satisfying demands of environmentally sensitive markets and end-users.

The Engineered System offering—
allows design flexibility using our
Novec™ 1230 Fire Protection Fluid
system design software.

Provides a high safety margin with a
4.2% use concentration and a 10%
NOAEL and > 10% LOAEL level.

Listed for hazard temperatures
between 0°F and 132°F.

Benefits:
• Provides a high safety margin with a 4.2% use concentration and a 10% NOAEL level.
• Listed for protection against Class A, Class B and Class C fires.
• Is a fluid a atmospheric pressure and can be gravity fed for easy re-charge.
• Extinguishes fire through heat absorption and not oxygen reduction.

Listings/Approvals:
UL
ULC
Factory Mutual Approved
MEA
If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com.

Kidde ECS Series FM-200® Fire Suppression System

Kidde ECS Series FM-200® Fire Suppression System

Environmentally-friendly. The preferred fire suppression system for vital facilities that can't afford fire-related business interruption of process controls, automated industrial operations, robotics, etc. Active on fire, but inert on people; non-toxic when used per NFPA Standard 2001. Safe, no-residue protection for Class A, B and C fires. Every Kidde system checked for design accuracy. Designed for maximum protection with minimum hardware; less space, lower cost. UL Listed and Factory Mutual approved.

Features:
• Reduces risk of downtime and helps maintain business continuity in the event of a fire.
• Clean leaving no residue. Safe for discharge into occupied spaces.
• Design concentrations for 95% of its applications fall well below NOAEL levels.
• Cost effective engineered system, providing maximum protection.
• Proven Kidde Reliability - tested and approved all of Kidde's various detection and control options.
• Sustainable technology providing an environmentally-friendly solution.

Technical Specifications:
• FM-200 agent actively attacks the fire to extinguish flames rapidly
• Engineered system providing a fast acting 10 second discharge
• Offers full-developed, flexible design limits to fit any application environment
• Design concentrations range from 6.25% to 7.0% for Class A and Class C hazards
• Easy to design using Engineered Series software


If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com | Web: http://TTLCompany.com

Kidde ADS Series FM-200 Fire Suppression System

Kidde ADS Series FM-200 Fire Suppression System 



The Kidde ADS FM-200 System is an engineered system designed to protect larger, more complex applications or for ultimate performance and “drop-in” efficiency when replacing existing halon installations. The system includes detectors, a control unit, agent storage cylinders, piping and discharge nozzles. The system uses clean, fast, people-safe FM-200 gaseous agent.

Features:
• Provide active fire protection when coupled with Kidde's various 24 hour detection and control systems.
• Appropriate for larger compartments or designs utilizing long piping networks.
• Increased performance deems it a virtual "Drop-in" replacement for installed Halol 1301 systems.
• Enhanced performance and versatility - Comes with a US Coast Guard approval and is listed and approved with 3-way directional valves for economic protection of multiple enclosures.

Technical Specifications:
• The ADS offers higher Cylinder fill capacities for more efficient agent storage.
• Utilizes a patented "Fan Type" nozzle for immediate vaporization of the agent as it discharges.
• Uses separate nitrogen storage as a propellant to obtain higher mass flow rates.
• Allows the use of smaller diameter pipe when compared to conventional clean agents system.

Listings/Approvals:
• UL Listed
• UL Canada (ULC)
• Factory Mutual Approved
• USCG - ADS Marine
• MEA

If you have any questions or concerns. Please feel free to contact us any time through this web site or through this email: Sales@TTLCompany.com |  Web: http://TTLCompany.com

Kidde Argonite® Fire Suppression System

Kidde Argonite® Fire Suppression System



1. The Argonite fire suppression system uses an inert gas that offers effective fire protection with zero environmental impact. It is a simple blend of 50% Argon gas and 50% Nitrogen gas with a density similar to that of air. Both Argon and Nitrogen are clean, natural gases that are readily available throughout the world. Argonite is safe and effective for use on many applications—it is well suited for leaky enclosures such as flight simulators, substations, and control rooms and for application with multiple hazards.
2. Argonite is an inert gas that extinguishes fire based on the principle of oxygen depletion. Argonite is an environmentally acceptable clean agent that offers Zero Ozone Depletion Potential (ODP) and Zero Global Warming Potential (GWP). It is safe for use in a wide range of sensitive applications where people are present and is electronically non-conductive. Argonite produces no post fire residue: thus, there is no damage to protected equipment and nothing to clean up. 
3. Argonite extinguishes fire by physically removing oxygen from the atmosphere. In occupied areas, people can breathe argonite at extinguishing concentrations without fear. There are no toxicological factors associated with the use of argonite and argonite will not decompose or produce any by-products when exposed to a flame from a fire condition.
4. Argonite is made of an equal blend of nitrogen and argon. It is suitable for fighting fires in confined spaces. Because its molecular weight is close to that of air, it lingers longer when discharged to extinguish a fire. This reduces the need for hermetic sealing of a protected room – a process that can be very expensive.
5. Should a fire start, Argonite is injected rapidly into the room, reducing the oxygen level from the normal 21% to between 11% and 13%. This is too low for further combustion to take place, yet high enough to allow essential safety personnel to operate.
6. Argonite suppression systems are suited to either total flooding or local applications. When more than a single room or compartment is protected, it is recommended that a central bank of argonite cylinders be connected via diverter valves. This is the most cost effective and efficient solution.
7. CODES/STANDARDS COMPLIANCE:
The design, installation, testing and maintenance of the above stated Argonite fire suppression system shall be in accordance to the following codes, standards and regulatory bodies:
A. NFPA 2001 – Standard for Clean Agent Fire Extinguishing Systems – 2004 edition.
B. NFPA 12A – Halon 1301 Fire Extinguishing Systems
C. UL 2166 – Standard for Halocarbon Clean Agent Extinguishing System Units
D. Factory Mutual Approval Guide
E. ANSI B1.20.1 – Standard for pipe threads, General Purpose, 1992
F. Design and installation practices set forth by system manufacturer
G. NFPA 70 - NEC – National Electrical Code
H. NFPA 72 – National Fire Alarm Code
I. Requirements of the Local Authorities Having Jurisdiction (AHJ)
The Fire suppression system must have the following listings and approvals:
A. FM Approved – Factory Mutual Research Center
B. ULC Listed – Underwriters Laboratories of Canada
The manufacturer shall meet ISO 9001 requirements for the design, production and distribution of the Argonite fire suppression systems.


If you have any questions or concerns. Please feel free to contact us any time through this web site or through this E-mail: Sales@TTLCompany.com  |  Web: http://TTLCompany.com

Thursday, September 22, 2011

Kidde CO2 (Carbon Dioxide) Fire Suppression Systems


Carbon Dioxide (CO2) Fire Suppression Systems

The Kidde Carbon Dioxide Fire Suppression System is an engineered system available in three application configurations: total flooding (for unoccupied areas), local application or hand-hose line. System includes detectors, a control unit, agent storage cylinders, piping and discharge nozzles. Gaseous carbon dioxide rapidly suppresses fire by a combination of cooling and oxygen displacement. Discharge duration and agent flow rates are customized for the individual application.

Recommended for protection of unoccupied facilities. Economical, computer-designed and engineered; using total flooding, hand hose line and/or local application.  The most technologically advanced CO2 fire suppression systems available. Colorless, odorless and electrically nonconductive. Rapid cleanup equals minimal downtime.

We install Kidde Carbon Dioxide (C02) fire suppression systems. C02 gas has a high ratio of expansion which facilitates rapid discharge and allows for three dimensional penetration of the entire hazard area quickly. Carbon Dioxide extinguishes a fire by reducing the oxygen content of the protected area below the point where it can support combustion. Carbon Dioxide Fire extinguishing systems typically store the agent in one of two different ways, high pressure cylinders, or low pressure CO2 tanks.


Advantages of Carbon Dioxide
When designed, engineered, and installed properly, Carbon Dioxide fire suppression systems will not damage sensitive electronic equipment. Carbon Dioxide has no residual clean-up associated with its use as a fire suppression agent. Carbon Dioxide fire extinguishing systems can be used to protect a wide variety of hazards, from delicate electronic equipment to high-voltage electrical equipment, all without causing damage to the equipment being protected.


Technical Specifications:
• Reduces the oxygen content of the atmosphere to a point where combustion becomes impossible.
• Hardware to accommodate any application and system type
• Offered in 25 lb to 100 lb Cylinders
• Hose reel line systems
• Directional valve system options
• Lockout valves and lockout circuits

Features:
• Proven quality and reliability with the Kidde brand
• Tested and approved all of Kidde's various detection and control options
• Inexpensive and plentiful to re-fill
• Wide ranges of proven safe, hazard protection


CO2 Is Versatile. Used on a wide variety of hazards throughout the world:
• Flammable liquid storage
• Printing presses
• Mixing Operations
• Spray Booths
• Industrial Ovens
• Dust Collectors
• Paint Lockers
• Marine Applications

Elements of a CO2 Fire Suppression System
A Carbon Dioxide Fire Suppression system consists of one or more banks of cylinder storage containers to supply the CO2 extinguishing agent. Flexible discharge bends, or hoses, connect the cylinders into a piping manifold. The manifold in turn distributes the agent into the piping network. Nozzles regulate the flow of CO2 into the protected area.

Before Carbon Dioxide is released into the protected facility, fire must be detected by a detection and control system. We use the Pegasys addressable control panel for Kidde systems and the Auto pulse control panel for CO2 systems.

Experience
We have extensive experience in the installation and design of CO2 fire suppression systems; in fact we have installed and maintained CO2 systems since our inception in 1999.

We have worked with major corporations to design CO2 systems nationwide for a variety of applications. Call today and speak with one of our knowledgeable professionals.


Listings/Approvals: UL Listed, FM, MEA, USCG 



If you have any questions or concerns. Please feel free to contact us any time through this web site or through this email:  Sales@TTLCompany.com